F5 ARX 4000 Hardware Installation Manual page 68

Chapter 6
Connecting the Switch to the Network
Management IP Mask
Management Gateway
Power Configuration
Private IP Subnet
Private IP Mask
Private VLAN
Private Metalog VLAN
Chassis GUID
Switch Password
Switch MasterKey
2oftVCwAAAAgAAAApwazSRFd2ww/H1pi7R7JMDZ9SoIg4WGA/XsZP+HcXjsIAAAADDRbMCxE/bc=
Wrapping Password
Crypto-officer Username
Crypto-officer Password
Enter 'yes' to load configuration or 'r' to restart # yes
You have completed the switch startup configuration.
The switch will now initialize the local database.
When the login prompt appears, log into the switch using
the crypto-officer's username and password.
Closing configuration file.
Processing configuration file. (boot-config)
...
User Access Authentication
Username: admin
Password: mypassword
SWITCH>
SWITCH> enable
SWITCH# copy ftp://juser:jpasswd@ftp.wwmed.com/a4kconfig scripts running
SWITCH# show scripts
scripts
running
SWITCH# run scripts running
6 - 12
255.255.255.0
10.1.23.1
110
169.254.94.0
255.255.255.0
1002
1003
d7270d56-9e39-11d8-83e1-a21e0cbcc384
#######
#######
admin
#######
The switch is now ready for configuration through the GUI or CLI.
To join it with its redundant peer, you can use the standard practice of
copying and applying the failed switch's running config:
Jun 12 17:45 2.1k