Disassembly and reassembly
3. Lubricating with HANARL: Others components
Apply the HANARL to the Inside and outside friction surface of the components such as ZOOMRING,
CAM BARREL, GUIDE PLATE as illustrated in image below.
!
CAUTION
■ Make sure to shake the HANARL well first before you use it until there are no lumps.
■ Apply the HANARL with a clean and good-quality brush, making sure the surface is clean.
■ HANARL is volatile product. Keep its container tightly covered.
BARREL OUTER GUIDE
ASSY SUB BARREL-OUTER CAM
Inside surface
thoroughly
3-18
Fig. 3-32
Copyright© 1995-2012 SAMSUNG. All rights reserved.
Inside surface
thoroughly