Ⅵ、Trouble Shooting - ROHS 6400AK Series User Manual

Ⅵ、Trouble Shooting
Problems
No action, no
pictures when power is
on
Abnormal self-
check. Images with
motor noise
Normal self-
check, but no images
Normal self-
check, but out of
control
Unstable images
Dome Camera out
of control
Intelligent Dome Camera (6400AK Series) User Manual
Possible reasons
Power supply
damaged or under power
Wrong connection of
power
Project line fault
Mechanical failure
Camera inclined
Power supply not enough
Wrong connection of
video
Bad connection of video
Camera damaged
Wrong connection of
signal control cable
Dome ID setup is
wrong
Protocol or
communication baud rate
is not matched
Bad connection of video
Power not enough
Self-check error
Bad connection of
Replace required power supply;
Put power supply close to
Adjust protocol to match
with the controller, and power
31
Solutions
Replace
Correct
Eliminate
Recondition
Reinstall
Dome Camera
Correct
Eliminate
Replace
Correct
Reselect
on again
Press to connect well
Replace
Power on again
Eliminate