the password is correct then enter into the Main Menu, if you do not select a
password-protected, you can access directly.
△System information
5.2.2 Exit the Menu
Three methods to exit the menu:
1. Choose exit button in the main menu, click "Left" button to exit the menu.
2. Transfer preset position "113" to exit the menu.
3. Transfer the Dome Camera functions in the menu, then carry out the related
functions, exit the menu at the same time.
5.3 Check the Basic Information
a. Choose "Information" in current operation.
b. Click "Right" button, it will display the basic information of the camera.
Return
c. Click "Left" button to return the main menu.
5.4 Enter the Core Setup
a. Choose "Core Setup" in current operation
b. Click "Right" button to enter into the core setting
△Mirror
Intelligent Dome Camera (6400AK Series) User Manual
Main Menu
Core Settings
Camera Settings
Camera Functions
Exit
Up/Down
Information
Version:6400AK 120301t
Camera ID:001
Baud Rate :2400
Control Protocol:Pelco-D
Voltage:15.0 12.0 3.0
Core Mode:Sony
Core Settings
Flip
Lens initialization
Focus
Enter
15