ROHS 6400AK Series User Manual page 26

5.5.4.3 Pattern Scanning
a. Choose the "Pattern Scanning" option
b. Click the "Right" button to enter the Pattern Scanning group input
c. Input numbers 1-4; click the "Right" button to enter the Pattern Scanning
"Allow/Forbidden" selections
d. Select "Allow" and click the "Right" button, the Pattern Scanning setting
will be start, you can choose those operations, such as :Up、 Down、 Left、 Right、
Variable、Focus、Aperture、Call Preset Position、Call Horizontal Scanning、Call
Two pots Scanning and Call Cruising; each pattern scanning can records 100pcs
different orders, and there is no limit between them.
e. Set preset position 11 to return back, Set preset position 12 to save and
return back
Set preset position 11 to return back
Set preset position 12 to save and return back
5.5.4.4 Testing
a. Choose the "Testing" option
b. Click the "Right" button, enter the scan testing
Return
c. Click "Up/Down" buttons, select the scan testing mode as below
Close Auto Scanning: The dome camera execute the Close Auto Scan
testing, setup preset points "11"to exit testing
Long-Distance Auto Scanning: The dome camera execute the Close Auto
Scan testing, setup preset points "11"to exit testing
Horizontal Scanning: The dome camera execute the Horizontal Scan testing,
Intelligent Dome Camera (6400AK Series) User Manual
Recording：00
Pattern scanning setting...
Scan Testing
△Close Auto Scanning
Long-Distance Auto Scanning
Horizontal Scanning
Pattern Scanning
Up/Down Enter
26