How To Use - Panasonic MJ-DJ01 Operating Instructions Manual

HOW TO USE

Wash all detachable parts and dry well before using the appliance for the first time, refer to page 8.
Unplug when assembling the unit. Before plugging in, ensure the Switch is switched to off.
1
Place the Container Unit
onto the Motor Housing.
 Make sure the Spout
 Make sure the Container
3
5
1 Plug in and switch on.
2 Insert the ingredients one
by one and push them
1
slowly into the Feeding Tube
2
using the Food Pusher.
3 Align the Food Pusher into
the Feeding Tube as
illustrated.
Note:
• Ingredients that are not recommended:
Soft fruits that produce puree and can clog the Spinner – e.g. bananas, peaches, apricots etc.
Low juice ingredients which can block the product – e.g. fresh basil leaf etc.
• During initial usage, the appliances might have some unpleasant smell (slight burn smell) but this condition is
normal.
• Some ingredients may produce a lot of pulps accumulate to the Container Cover that cause operation stop.
(CIRCUIT BREAKER PROTECTION: refer to page 6)
• Make sure all parts are correctly mounted before you switch on the appliance.
• Please use the Juice Jug with the Cup Cover to avoid juice splashing. Make sure to align the Juice Jug opening
to the Spout when juicing.
• For model MJ-DJ01, speed 2 is suitable for hard type fruits e.g. apples, carrots etc. while speed 1 is suitable for
softer type fruits e.g. watermelons.
and the Clamps
positioned same
direction as illustrated.
Unit sits properly on the
Motor Housing.
1 Push the Clamps
as shown until a
locking sound is
heard.
 If the Clamps are
not clamped
correctly, the motor
will not operate.
3
2
3
2
1
4
120°
6
 Some pulp might be hard to collect in the Pulp
Container and stick on the Container Cover
depending on the ingredients and amount.
1 Attach the Pulp
Container and make
sure it is fully
aligned with the
body.
2 Place the Spinner
in the Container
Unit and fix it into
position.
3 Place the Container
Cover onto the
Container Unit.
Place the Juice Jug as
shown.
 Make sure the Spout
is in the downward
position when juicing.
Note:
The Spout can be
*
rotated freely for 120°
when the Spout is in the
upward position.
After use, switch off and
unplug.
 While removing the
Juice Jug, ensure
the Spout is pulled
up to prevent juice
from dripping.
 Ensure the Spinner
is fully stopped
before release the
Clamps.
7