Onkyo HT-R580(B) Service Manual page 8

QQ
3 7 63 1515 0
MAIN/DSP Update Procedure-1 (How to check
[NOTE] FW version combination
* OSD FW cannot be updated.
*Combination of "OSD_FW and Main_FW" has limitation .
Do not use combination except the list.
*
OSD menu will not appear. Before FW UPdate. check the versions of FWs.
* To upgrade OSD FW version,
Replace Q8105 SPI_MEMORY "EN25Q32A-100HIP" or HDMI Board.
TE
L 13942296513
To check FW Versions on the monitor,
While the unit is on, hold down [DISPLAY] and the press [ON/STANDBY].
FW Versions of Main/DSP/OSD will be shown on the monitor like below.
To check FW versions on Front Display,
While the unit is on, hold down [DISPLAY] and the press [ON/STANDBY].
1.
Main FW Version
e.g.
2.
While Main FW Version is shown, press [+(TONE)].
DSP FW Version
www
e.g.
.
OSD FW Version will not be shown on Front Display.
http://www.xiaoyu163.com
Version Information
Main: 1.07/10413AL
DSP: 1.02/10419a38
OSD: 1.01/10204A0
CHECKSUM: 27D3879D
will be shown on Front Display.
M:1.07/10413AL
will be shown on Front Display.
D :1 .0 2 /1 0 4 1 6 a 3 8
x ao u163
y
i
http://www.xiaoyu163.com
TX-SR308/ 508 HT-R280/ 380/ 538/ 580/ HT-RC230
2 9
8 FW Version)
FW Version Combination "As of August, 2010"
Main
1.04
1st Lot
1.05
Later Lots
1.06
1.07
1.08
Q Q
3 6 7 1 3 1 5
ON/STANDBY
+(TONE)
* It depends on the version.
* It depends on the version.
co
.
9 4 2 8
DSP OSD marking
1.00 1.00
NO
A
1.01
B
1.01
C
1.02
D
marking is the S/N end
0 5 8 2 9 9 4 2 8
DISPLAY
m
9 9
9 9