General Information; Ordering Information - GE NX-320E Installation Manual

G
ENERAL INFORMATION
The NX-320E is a microprocessor controlled remote power supply module for the NETWORX
control panel range. The NX-320E has three (3) programmable outputs and one (1) dedicated
bell output. A maximum of four (4) NX-320E power supply modules can be added to the
NetworX control panel NX-8 and a maximum of eight (8) power supply modules can be added
to the NetworX control panel NX-8E. This means a total output count of 16 (32 for NX-8E), of
which 12 (24 for NX-8E) are programmable and 4 (8 for NX-8E) are dedicated bell outputs.
These 12 (24 for NX-8E) programmable outputs can be used as auxiliary power, smoke
detector power, siren driver power, etc. (see chart on page 8). Each NX-320E has a tamper
terminal that can be used to supervise the metal enclosure. When the NX-320E is connected
to the NetworX control panels, the maximum total wire run from the panel to all devices,
including the NX-320E, is 800 m. Additionally, the maximum total wire run from the NX-320E to
all outgoing devices is 800 m.
O
RDERING INFORMATION
For detailed ordering information and part numbers, please refer to the EMEA Distribution
price list of the Caddx product range.
NX-320E Installation manual Page 4 19/09/05