Sound - Bang & Olufsen BeoSound Moment Installation Manual

Sound

Speaker setup
During first time setup only one or one pair of speakers are connected to.
When more speakers are used with BeoSound Moment they must be setup manually using the following instructions.
Wired and wireless speakers set up with BeoSound Moment can be played simultaneously.
Set up wireless speakers
Note: some wireless speakers have a Reset button that may be activated if the speaker has been used in another setup or has been scanned by
another wireless transmitter.
When wireless speaker(s) are set up in the first time setup, the speaker(s) are listed with type, and channel.
If no speakers are set up with the BeoSound Moment and it is desired to connect such, do the following:
- Press
- For each speaker, press
The speakers will then be connected.
Set up wired speakers
Read instruction.
All wired speakers connected are identified as a speaker, and for each of these the following must be done:
- The speaker is either identified as the '<correct type>' or as Other - in the type field press
- For each speaker, press
Repeat the above for each speaker.
The speakers will then be connected.
Subwoofer
When a subwoofer is connected either wired using Power Link cable or wirelessly, the subwoofer is identified and the bass management function
is automatically activated.
If other speakers (L and R) are connected using Power Link cable only one speaker is connected to a PL socket of the BeoSound Moment hub
(SoundHeart), and the two speakers are daisy chained by Power Link cable.
and all wireless speakers found will be listed with type.
Rescan
and press the appropriate channel. Note that subwoofer speakers will have subwoofer as channel.
Locate
and press the appropriate channel.
Locate
Settings
and scroll up/down in the list to find the correct type
39