Vision HD-300N User Manual page 9

GENERAL INFORMATION
IV. HOW TO SETTING RCU FOR TV
1. Manual Search
At first, Turn on the TV
3
"OK" key
1) Press and
"TV LED Lamp"
Then the
2) Find the the TV code in Brand List ( the code is composed of 4 digits ) and insert the 4 digits.
( If the 4 digits were inserted correctly,
be turn off ==> go to 3)-1.
but if the codes were inserted wrong the
TV will be kept turning on ) ==>
==> In this step, you should insert 4 digits of code with 10 seconds. If not this setting process
will be failed.
3) - 1 If TV turns off, press "OK" Key and TV LED Lamp will be twinkled 2 times again.
Please turn on the TV using
6
channel Key
or any other keys of RCU whether they working properly If the power buttons
works but other keys does not work, it means the code was not inserted correctly.
Please start again from the step 1) and insert other code of the TV Brand. Normally TV brand
has several codes, not unique.
3) -2 Please start again from the step 1) and insert other code of the TV Brand. Normally TV brand
has several codes not unique.
2. Auto Search
At first, Turn on the TV
"OK" key
1) Press and
"TV LED Lamp"
Then the
4
UP or Down Key
2) Press the
3) When the TV turns off, press the
4) Please turn on the TV using
Key
or any other keys of RCU whether they working properly.
5) If the power buttons works but other keys does not work, it means the auto serching was not
done properly Pleaes start again from step 1) to step 4) until all keys of RCU works well.
1
"TV LED Lamp"
in RCU at the same time for more than 2 or 3 seconds.
will turn on/off 2 times ( will be twinkled 2 times ).
"TV LED Lamp"
"TV LED Lamp"
go to 3)-2.
2
"Power button"
"TV LED Lamp"
in RCU at the same time for more than 2 or 3 seconds.
will turn on/off 2 times ( will be twinkled 2 times ).
until the TV turns off.
OK
key and the
"Power button"
will be twinkled 2 times and
will be twinkled long only 1 time and
volume key
in RCU and check
TV LED Lamp
will be twinked 2 times.
check volume key
in RCU and
TV will
5
and
channel
and
7