Vision HD-300N User Manual page 19

MENU GUIDE
II. INSTALLATION
f) Motor Control
Select the position using   and then press OK.
Message box displays on the screen.
- Store Sat position : Stores the current position
- Goto Sat Position : Moves the motor to the stored posi-
tion of the selected satellite.
- Goto Center : Goes to the center of the motor.
- Limit off : disable East, West limit.
- Set East Limit : Set current position as East Limit.
g) Satellite Position
- Input directly the position using NUMBER KEY on
the RCU
- Select the direction using   (WEST / EAST).
h) Search Option
- Press OK to display the Search Option list.
- Select the Search Option that you want and then
press OK.
2. Edit my local position
- Press Green Button to edit local Position.
a) Longitude
- Input directly the Longitude using NUMBER KEY on the RCU.
- Select the direction using   (WEST / EAST).
b) Latitude
- Input directly the Latitude using UNMBER KEY on the RCU.
- Select the direction using  (NORTH/SOUTHd).
3. Press EXIT to return to the previous menu or press MENU to go to the current live channel.
of the motor for the selected satel-
lite.
- Set West Limit : Set current position as
- Recaluation Position.
- Reset Position : Resets all stored position
i) Search
- Press Search to start scan channels.
- Press OK to start scanning.
 TP EDIT : To Edit TP Press the RED button on
the RCU.
West Limit.
of the motor.
17