Setting The Working Height - Duerkopp Adler 669 Premium Operating Instruction

110
7.6

Setting the working height

WARNING
Risk of injury from moving parts!
The tabletop can sink under its own weight when
the screws on the stand bars are loosened.
Crushing possible.
Ensure that your hands are not jammed when
loosening the screws.
CAUTION
Risk of musculoskeletal damage from
incorrect setting!
The operator can sustain musculoskeletal
damage if failing to comply with the ergonomic
requirements.
Adjust the working height to the body height of the
person who will operate the machine.
The working height is continuously adjustable between 750 and
900 mm (clearance between the floor and upper edge of the
tabletop).
Fig. 55: Setting the working height
(1) - Screws
Operating Instructions 669 PREMIUM - 00.0 - 11/2016
Setup
①