Controllable Single Point (Spc) For Opc Internal Data - ABB COM600 series User Manual

3.5.7.4.
28
COM600 series, Version 4.1
External OPC Server User's Manual
Property/Para- Value or Value range/ Default
meter
Item Tag Path

Controllable single point (SPC) for OPC internal data

Table 3.5.7.4-1 Configurable SPC (for OPC internal data) properties for OPC Servers
Property/Para- Value or Value range/ Default
meter
Basic
Common Data SPC
Class
Addresses
Item Tag Path Default: None
Description
Item tag path for the internal status
information. The internal server tags that
can be used are located in the Attributes
nodes that are located under the root, line,
and IED nodes. When an attribute tag is
referred to in the internal item definitions
below, it is possible to use either the whole
tag path or just the path relative to the IED
(the internal tags are configured per IED);
e.g. Attributes\Diagnostic counters\Trans-
mitted data messages. When the whole
path is used, it must be preceded by a
slash (/) character, e.g. /Channel
Name\Attributes\Diagnostic counters\Trans-
mitted data messages.
Description
Common data class according to IEC
61850.
Item tag path for the internal status
information. The internal server tags that
can be used are located in the Attributes
nodes that are located under the root, line
and IED nodes. When an attribute tag is
referred to in the internal item definitions
below it is possible to use either the whole
tag path or just the path relative to the IED
(the internal tags are configured per IED)
e.g. Attributes\Diagnostic counters\Trans-
mitted data messages. When the whole
path is used it must be preceded by a
slash (/) character e.g. /Channel
Name\Attributes\Diagnostic counters\Trans-
mitted data messages.
1MRS757274