Changing The Internal Light; Reversing The Door Swing - Kelvinator KIL320BFWD User Manual

Servicing
This product should be serviced by an authorized engineer and only genuine spare parts should be
used.
Under no circumstances should you attempt to repair the appliance your self.
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact
the local store where your purchase was made.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all
foods and clean the appliance, leaving the door ajar to prevent unpleasant smells.

Changing the internal light

1. Before carrying out the bulb replacement always press and turn the thermostat control to dial
to position 0, then disconnecting the mains supply.
2. Hold and lift up the light bulb cover.
3. Remove the old bulb by unscrewing it in an anti-clockwise direction.
4. Replace with a new bulb (10W) by screwing it in a clockwise direction marking sure that it is
secure in the bulb holder.
5. Refit the light cover and re-connect your Fridge/Freezer to the mains supply and switch on.

Reversing the Door Swing

To change the opening direction yourself, please follow these instructions:
Tools required: Philips style screwdriver / flat bladed screwdriver / Hexagonal spanner
1. a. Remove all the cover's screws first.
b. Lift the top cover away from the Fridge.
c. Remove the left hinge cover. Insert the right hinge cover.
13