1. Safety instructions FOR SAFE AND EFFICIENT OPERATION Be careful with heat and extreme temperatureAvoid exposing it to direct rays of the sun or near a heating appliance. Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C. Keep away from humidity, water and dust Do not place the set in a location with high humidity or lots of dust.
Page 4
1.1 Overhead Rigging This Item must be built in a way that it can hold 10 times more of its weight for 1 hour without causing any damages. The installation must be secured with a secondary safety attachment. The safety attachment has to be constructed in a way that no part of the installation can fall down When rigging, de-rigging or servicing the fixture staying in the area below the installation place, on bridges, under high working places and other endangered areas is forbidden.
1.2. Power Connection !! CAUTION !! Never leave this device running unattended!! Every person that is involved with this Item has to be qualified!! Connect item with the main plug. The voltage and frequency must exactly be the same as stated on the device.
Page 6
3. After connecting to the power source you can start the fixture. 4. Attention: The xlr plug is no dmx plug! Never use dmx fixtures in one line with this effect. 4. Starting up 1. Plug in the power cord. Now the fixture is in music mode 2.
Page 7
Importeur: B & K Braun GmbH Industriestraße 1 D-76307 Karlsbad www.bkbraun.com info@bkbraun.com B10-200529-01 7 / 7...
Need help?
Do you have a question about the VERTIGO and is the answer not in the manual?
Questions and answers