Use Philips Easylink; Play; Play A Disc - Philips BDP3100 User Manual

Network Installation
Video Setup
View Network Settings
Audio Setup
Network Setup
EasyLink Setup
Preference Setup
Advanced Setup
4
Select [Network Setup], and press .
5
Select [Network Installation], and press OK.
6
Follow the on-screen instructions to complete
the network installation.
Tip
•
You can check the status of the wired connection of this
product (see "Adjust settings" > "Network Setup" >
[View Network Settings] or [View Wireless Settings]).
Note
•
Loading BD-Live content from the internet may take
some time, depending on the file size and the speed of
the internet connection.

Use Philips EasyLink

This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
•
To enable the EasyLink feature, you must turn on the
HDMI CEC operations on the TV and on other devices
connected to TV. Refer to the TVs/devices manual for
details.
One-touch play
1
Press (standby) to turn on this product.
»
The TV (if the TV supports one-touch play)
automatically turns on and switches to the
correct video-in channel.
»
If a disc is loaded in this product, disc play
automatically starts.
One-touch standby
1
Press and hold (standby) for more than 3
seconds.
»
All the connected devices (if the device
supports one-touch standby) automatically
switch to standby.
Note
•
Philips does not guarantee interoperability with other
HDMI CEC devices.

5 Play

Play a disc

Caution
•
Do not place any objects other than discs into the disc
compartment.
1
Press on the front panel to open the disc
compartment.
• You may also press and hold
remote control to open/close the disc
compartment.
2
Insert a disc with its label facing up.
3
Press to close the disc compartment and
start disc play.
• To view disc play, turn on the TV to the
video input.
• To stop disc play, press
Note
•
Check disc/file formats supported (see "Your product" >
"Playable media").
•
If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see "Adjust settings" > "Preference Setup" >
[Parental Control] ).
•
If you pause or stop a disc, the screen saver appears after
10 minutes of inactivity. To deactivate the screen saver,
press any button.
•
After you pause or stop a disc and no button is pressed
within 30 minutes, this product automatically switches
to standby.
on the
.
EN 11