List Of Settings - Philips 1VMN30256A User Manual

In the settings menu, you can customize the various kinds of settings as you prefer.
Refer to the following instruction to navigate through the settings menus.
1) Press [ (home)] to access the home menu.
2) Use [K / L] to select "Settings", then press [OK].
3) Use [K / L] to select the desired setting, then press [OK].
4) Use [K / L] to move the highlight up and down in the list.
• Options of the highlighted item will be displayed in the list on the right whenever available.
5) To make a selection or to access options of an item, select the desired item, then press [OK].
• To go back to the previous screen, press [BACK
6) Press [ (home)] to exit.
Refer to the following table for the types of settings you can customize.
The item highlighted in gray is the default setting.
Category
3D Output Auto (XX)
3D
2D
This feature
is available
only when
the display
device is
connected
by an HDMI
cable.
Language Audio
Subtitle
Disc Menu
Player Menu

LIST OF SETTINGS

].
Menus / Options
Default
Ceština
Dansk
Deutsch
English
Español
Français
Italiano
Magyar
Nederlands
Off
Ceština
Dansk
Deutsch
English
Español
Français
Italiano
Magyar
Nederlands
Ceština
Dansk
Deutsch
English
Español
Français
Italiano
Magyar
Nederlands
Auto (XXXX)
English
Español
Français
Sets the 3D output mode for playback
of Blu-ray 3D Discs.
"Auto (XX)":
Playback picture will be output in 3D
or 2D mode, depending on a disc or
the connected TV. (Inside the
parenthesis next to "Auto" will be the
current output mode.)
"3D":
Outputs the picture in 3D mode.
"2D":
Outputs the picture in 2D mode.
Sets the audio language for BD-video,
DVD-video or AVCHD playback.
Norsk
• If you select "Default", the disc's
Polski
original language will be in effect.
Português
Русский
suomi
Svenska
Türkçe
Sets the subtitle language for BD-
video, DVD-video or AVCHD playback.
Norsk
Polski
Português
Русский
suomi
Svenska
Türkçe
Sets the language for disc menu.
Norsk
Polski
Português
Русский
suomi
Svenska
Türkçe
Sets the language for player menu
(OSD menu)
"Auto":
Activates the Get & Set Menu
Language function. Refer to page 62.
• "Auto" is available only when
"EasyLink (HDMI CEC)" is set to "On".
• Inside the parenthesis next to "Auto"
will be the current selected
language.
EN
Description
EN 45