Philips 1VMN30256A User Manual page 65

Problem
in the upper right hand corner
of the TV screen.
Buttons do not work or the unit
stops responding.
Cannot find a JPEG file.
Cannot find an MP3 and
Windows Media™ Audio file.
Error message appears when I
select "Auto" in the "Player Menu".
Cannot connect to the network.
Cannot use the wireless
connection.
Cannot get into the PC's screen after
"MediaConnect" is selected.
Cannot connect to the network while
my PC is connected to the network.
The capacity of the SD card
decreased.
MPEG-2 video and audio on the SD
card cannot be played back.
The contents of the card cannot be
read.
Cannot use the BD-Live function or
download of data does not perform
properly.
Cannot play back BD-video(BD-
ROM Profile 2.0).
Folder or files stored on DLNA
home media server are not
displayed in the file list or cannot
be played back.
Cannot use Netflix feature.
Cannot add movies or TV episodes
to the instant Queue.
TROUBLESHOOTING
Tip
The operation is not possible.
To completely reset the unit, press and hold [ (standby/on)] on the front
panel for 10 seconds to shut down the unit or unplug the AC cord from the
AC outlet for 5-10 seconds.
Make sure that the selected group (folder) does not contain more than
9,999 files for BD / DVD / SD card, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Make sure that the selected folder does not contain more than 9,999 files for
BD / DVD / SD card, and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or .WMA
for Windows Media™ Audio.
Make sure that the unit is connected to the PHILIPS brand EasyLink TV and
the "EasyLink (HDMI CEC)" is set to "On".
This error message may appear when your TV's OSD language is not
supported by this unit.
Check if the network connection is properly made.
Turn on the modem or router.
Check the network settings.
Check if the router and/or modem is correctly connected.
Check the "BD-Live Setting".
When connecting directly to a modem via a LAN cable, you might need to
power cycle the modem to reset settings on the modem.
Once you have activated the wireless connection please wait 30 seconds for
the connection to be established after turning on the unit, before trying to
access network features such as BD-Live, DLNA, Netflix, CinemaNow,
Blockbuster or VUDU.
The startup screen (PHILIPS logo with spinning circle) keep displaying until
the unit found the PC that is running Philips Wireless MediaConnect.
Make sure if the network connection is connected properly.
Check if your PC runs Philips Wireless MediaConnect.
Make sure your TV and PC are connected on the same network.
Check the content of your Internet service contract to see if your Internet
Service Provider prevents multiple terminals connecting at the same time.
Data may be written to the SD card when a BD-video that supports the
virtual package is used and an SD card is in the slot.
MPEG-2 is noncompliant on this unit.
The card is not compatible or the contents on the card may be damaged.
Turn off and then turn the unit on again.
Insert an SD card with enough capacity(1GB or more).
Check if an SD card is correctly inserted.
Make sure the write-protect switch on the SD card is not enabled.
Insert an SD card(1GB or more) which is formatted on this unit.
Some discs with BD-Live function require memory when playing back the
content.
Do not remove the card during playback.
Make sure the write-protect switch on the SD card is not enabled.
Check the setting on your home media server.
(Refer to the user manual of the home media server.)
Check the network connection and settings.
Netflix is available only in the United States.
Check if the network connection is properly made.
Visit netflix.com/Philips on your PC and become a Netflix member.
Visit netflix.com on your PC.
Adding movies or TV episodes on this unit is not available.
EN
EN 65