Page of 5

HP J9170A User Manual

10.9 / 13.5 dbi dual-band point-to-point 3-element mimo directional antenna.
Hide thumbs
   
HP 10.9 / 13.5 dBi Dual-Band Point-to-Point 3-Element MIMO
HP 10.9/13.5 dBi Dual-Band Point-to-Point 3-Element MIMO Directional Antenna (J9170A) Guide
Directional Antenna (J9170A) Guide
The HP J9170A antenna and all associated equipment should be
The HP J9170A and all associated equipment should be installed in
installed in accordance with applicable local and national electrical
accordance with applicable local and national electrical code guidelines
code guidelines to ensure safe operation.
to ensure safe operation.
Before connecting an outdoor antenna to an HP Wireless Access
Before connecting an outdoor antenna to an HP Wireless Access Point,
Point, be sure that the access point radio power levels are set in
accordance with local regulatory requirements. For information on
be sure that the access point radio power levels are set in accordance
setting radio power levels, see Transmit power control in the
with local regulatory requirements. For information on setting radio
MSM3xx/4xx Access Points Management and Configuration Guide.
power levels, see Transmit power control in the MSM3xx/4xx Access
For mandatory antenna power settings by country/region, look for
Points Management and Configuration Guide .
Antenna Power-Level Setting Guide (for MSM products) at
For mandatory antenna power settings by country/region, look for
www.hp.com/networking/support.
Antenna Power-Level Setting Guide (for MSM products) at
Please read all instructions carefully before attempting to
www.hp.com/networking/support.
install and use this product.
Grounding: System grounding and lightning protection are essential,
Please read all instructions carefully before attempting to
especially for exterior-mounted antennas exposed to the elements.
install and use this product.
Never install an antenna where it may fall and contact electrical lines.
: System grounding and lightning protection are
GROUNDING
essential, especially for exterior-mounted antennas exposed to the
elements. Never install an antenna where it may fall and contact
electrical lines.
Item
Frequency
Gain with 34" cable (dBi)
Item
VSWR Maximum
Frequency, GHz
3 dB Beamwidth – Azimuth
Gain with 34" cable (dBi)
3 dB Beamwidth – Elevation
VSWR Maximum
Polarization
3 dB Beamwidth - Azimuth
Maximum Input Power
3 dB Beamwidth - Elevation
Cable Length in. (mm)
Polarization
Mechanical Size in. (mm)
Maximum Input Power
Weight
Cable Length
Antenna Connection
Mechanical Size
Radome
Weight
Mount Style
Antenna Connection
Operating Temperature
Radome
Wind Surface Area
Mount Style
Wind Survival
Operating Temperature
Water/Dust Seal Rating
Wind Surface Area
Wind Survival
WARRANTY AND SUPPORT INFORMATION
Water / Dust Seal Rating
See the warranty and support information included with this product. For
WARRANTY AND SUPPORT INFORMATION
the latest information, go to www.hp.com/networking/support.
© Copyright 2010, Hewlett-Packard Development Company, L.P.
See the warranty and support information included with this product.
The information contained herein is subject to change without notice.
For the latest information, go to www.hp.com/networking/support.
Printed in Malaysia
November 2010
© Copyright 2011, Hewlett-Packard Development Company, L.P
Document Part Number: 5998-0860
The information contained herein is subject to change without notice.
*5998-0860*
Printed in Malaysia
May 2011
Part Number: 5998-0860
*5998-0860*
SAFETY
SAFETY
SPECIFICATIONS
Specification
2.4-2.5 GHz & 5.1-5.9 GHz
10.9 dBi @ 2.4-2.5 GHz, 13.5 dBi @ 5.1-5.9 GHz
Specification
2.0:1
2.4-2.5 & 5.1-5.9
45°@ 2.4 GHz /20°@ 5.0 GHz
10.9 @ 2.4-2.5 GHz, 13.5 @ 5.1-5.9 GHz
45°@ 2.4 GHz /20°@ 5.0 GHz
2.0:1
Linear, 2 Vertical,1 Horizontal
45° @ 2.4 GHz / 20° @ 5.0 GHz
10 Watt
45° @ 2.4 GHz / 20° @ 5.0 GHz
34" (860 mm) Plenum rated
Linear, 2 Vertical, 1 Horizontal
16.2"x 14.7"x 1.4" (411.4 x 373.3 x 35.8mm)
10 Watt
2.4 lb. (1.1 kg)
34 in. (860 mm) Plenum rated
Type N (male) connector (3x)
16.2" x 14.7" x 1.4"
(411.4 x 373.3 x 35.8 mm)
ASA
2.4 lb. (1.1 kg)
Articulating for Mast/Wall
Type N (male) connector (3x)
-30º C to +65º C
ASA
2
@ 0º, 0.0067m
/ @ 90º, 0.009m
Articulating for Mast / Wall
200 km/h
-30°C to +65°C
IP67
@ 0°, 0.0067 m
/ @ 90°, 0.009 m
2
200 km/h
IP67
The HP J9170A is a dual-band, point-to-point directional panel antenna
for use in 802.11n MIMO applications. Enclosed in a compact, low-profile
The HP J9170A is a dual-band, point-to-point directional panel
radome, the antenna is mounted to a rugged, articulating mount. The
antenna for use in 802.11n MIMO applications. Enclosed in a
mount can be affixed to a mast or anchored to a wall.
compact, low-profile radome, the antenna is mounted to a rugged
Each of the three MIMO antenna elements are connected to the access
articulating mount. The mount can be affixed to a mast or anchored to
point via low-loss, plenum-rated coaxial pigtails. The radiation patterns
a wall. Each of the three MIMO antenna elements are connected to the
access point via low-loss, plenum-rated coaxial pigtails. The radiation
are uniform and symmetrical, providing high-level signal density into
patterns are uniform and symmetrical, providing high-level signal
defined coverage zones.
density into defined coverage zones.
This antenna will greatly enhance the performance of 802.11n systems.
This antenna will greatly enhance the performance of 802.11n
The dual-band frequency coverage means that a single antenna can be
systems. The dual-band frequency coverage means that a single
deployed with any MIMO radio in the 2.4-2.5 GHz or 5.1-5.9 GHz bands.
antenna can be deployed with any MIMO radio in the 2.4-2.5 GHz or
5.1-5.9 GHz bands.
Antenna cable port identifaction and polarization is as follows:
Antenna cable port identification and polarization is as follows:
• Port 1 (Blue), vertically polarized
• Port 1 (Blue), vertically polarized
• Port 2 (Red), vertically polarized
• Port 2 (Red), vertically polarized
2
• Port 3 (Green), horizontally polarized
Respect color coding when connecting to the access point (AP).
• Port 3 (Green), horizontally polarized
Respect color coding when connecting to the access point (AP).
2
.
Port 1 (Blue)
Photo 1
Port 1 (Blue)
New coming
DESCRIPTION
DESCRIPTION
ANTENNA PORTS
ANTENNA PORTS
Port 2 (Red)
Port 3 (Green)
Port 2 (Red)
Port 3 (Green)

Advertising

   Related Manuals for HP J9170A

   Summary of Contents for HP J9170A

  • Page 1: Specifications

    HP 10.9 / 13.5 dBi Dual-Band Point-to-Point 3-Element MIMO HP 10.9/13.5 dBi Dual-Band Point-to-Point 3-Element MIMO Directional Antenna (J9170A) Guide Directional Antenna (J9170A) Guide SAFETY SAFETY The HP J9170A antenna and all associated equipment should be The HP J9170A and all associated equipment should be installed in...

  • Page 2

    (3) and 1 hex nut 5-16” (6) assemble as shown. 3. For mounting on a wall: The J9170A is shipped with a heavy duty articulating mounting kit (HP a. Using the other supplied antenna mount bracket (1) as a template...

  • Page 3

    E Plane 180° Sealant Tape or Rubberized Protectant # 10 Ground Lead Photo 2 H Plane 0° E Plane 0° H Plane 270° E Plane 270° Plot Orientation Diagram HP 10.9/13.5 dBi Dual-Band Point-to-Point 3-Element MIMO Directional Antenna (J9170A) Guide...

  • Page 4

    5.47 GHz (Port 2 Vertical Polarization) H Plane E Plane H Plane E Plane 5.47 GHz (Port 3 Horizontal Polarization) 2.45 GHz (Port 3 Horizontal Polarization) H Plane E Plane H Plane E Plane HP 10.9/13.5 dBi Dual-Band Point-to-Point 3-Element MIMO Directional Antenna (J9170A) Guide...

  • Page 5

    5.725 GHz (Port 1 Vertical Polarization) H Plane E Plane 5.725 GHz (Port 2 Vertical Polarization) H Plane E Plane 5.725 GHz (Port 3 Horizontal Polarization) H Plane E Plane HP 10.9/13.5 dBi Dual-Band Point-to-Point 3-Element MIMO Directional Antenna (J9170A) Guide...

Comments to this Manuals

Symbols: 0
Latest comments: