Fujitsu SRS-1050 User Manual page 11

System Administrator
ISDN is very flexible in allowing businesses to customize how it works
to meet their specific needs. This User's Guide refers you to your
System Administrator if a customized option may have been chosen
during installation.
Your System Administrator may be your phone company representative
or a member of your telecommunications department.
Call Appearance Preference
The SRS-1050 allows you to specify which Call Appearance button it
selects when you go offhook (lift the receiver or press SPEAKER). You
have four choices:
• Primary line preference. The SRS-1050 always selects button
number 1, the Call Appearance associated with your primary
directory number.
• No preference. The SRS-1050 does not automatically select any
Call Appearance button when you go offhook. You must press the
button you wish to be connected to either before or after you go
offhook.
• Ringing line preference. The SRS-1050 selects the Call
Appearance button that is ringing with an incoming call. You are
immediately connected to the call.
•
Idle preference. The SRS-1050 selects an idle Call Appearance.
For more details about Call Appearance preference, see "Selecting CA
Preference," in Chapter 3.
( Fujitsu SRS-1050
Page 11