Figure 2.
Installing the back cover
1.
Align the back cover with the screw holes on the computer.
2.
Tighten the screws to secure the base cover to the computer.
3.
Follow the procedure in
Removing the battery module
1.
Follow the procedure in
2.
Remove the
back
cover.
3.
To remove the battery:
a. Disconnect the battery cable from the connector on the system board [1].
b. Remove the screws that secure the battery to the computer [2].
c. Lift and remove the battery from the computer [3].
14
After working inside your computer
Before working inside your
computer.