Installing A Dimm; Removing A Dimm - Asus AP2400R-E2 Service Manual

2.3.2 2.3.2 2.3.2

Installing a DIMM

Installing a DIMM Installing a DIMM
2.3.2 2.3.2 Installing a DIMM Installing a DIMM
Make sure to unplug the power supply before adding or removing DIMMs
or other system components. Failure to do so may cause severe damage
to both the motherboard and the components.
Follow these steps to install a DIMM.
1. Unlock a DIMM socket by pressing
the retaining clips outward.
2. Align a DIMM on the socket such
that the notch on the DIMM
matches the break on the socket.
U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p U n l o c k e d r e t a i n i n g c l i p
3. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the DIMM
is properly seated.
L o c k e d r e t a i n i n g c l i p L o c k e d r e t a i n i n g c l i p L o c k e d r e t a i n i n g c l i p L o c k e d r e t a i n i n g c l i p L o c k e d r e t a i n i n g c l i p
2.3.3 2.3.3 2.3.3

Removing a DIMM

Removing a DIMM Removing a DIMM
2.3.3 2.3.3 Removing a DIMM Removing a DIMM
Follow these steps to remove a DIMM.
1. Simultaneously press the
retaining clips outward to unlock
the DIMM.
2. Remove the DIMM from the
socket.
Support the DIMM lightly with
your fingers when pressing
the retaining clips. The DIMM
might get damaged when it
flips out with extra force.
2 - 1 4 2 - 1 4 2 - 1 4 2 - 1 4 2 - 1 4 C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p