Table of Contents
Advertisement
5.
Place a hard disk drive into the
drive tray, and secure it with
four screws (two on each side).
6.
Carefully insert drive tray and
push it all the way to the depth
of the bay until just a small
fraction of the tray edge
protrudes.
7.
Push the tray lever until it clicks,
and secures the drive tray in
place. The drive tray is correctly
placed when its front edge aligns
with the bay edge.
2 - 1 6
2 - 1 6
2 - 1 6
2 - 1 6
2 - 1 6
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
Advertisement
Table of Contents
