General Instructions - Work Pro WD 2012 DMX User Manual

General Instructions

Thank you for your purchase. Please read the following instructions
before using your new unit. After being read thoroughly, this manual
shall be kept with the fixture for future reference.
Every unit is thoroughly tested and shipped in perfect
condition. Carefully unpack the unit and inspect
CAUTION!
equipment for shipping damage.
This fixture is not intended for home use.
Do not make any inflammable liquids, water or metal
objects enter this unit.
There are no user-serviceable parts inside. Do not take
the metal housing apart.
Servicing must be conducted by qualified service
personnel.
This product must be earthed.
!
WARNING
Never operate unit when case is open.
To prevent the risk of fire or electric shock , do not
expose this appliance to high temperature or humidity.
Always disconnect the unit from main power
before servicing unit , there may be high voltage inside
console.
1
Page 1
2. Guia de Funcionamiento
2.4 Menu Setup
2.4.11 Borrar Todo
DELETE ALL borra todas memorias, chases, direcciones DMX, curvas, etc.
Lo cual se logra girando el encoder mientras se pulsa la tecla derecha.
ATENCION
Todos los datos serán borrados y reprogramados. Sea cuidadoso usando
esta función.
1
3 6
Pagina 53