Table of Contents
Advertisement
Once the R120's bottom lid is seated press it firmly into the cleaner, the two red side tabs should click into place and turn the front and rear
n
red retaining clips as indicated by the directional arrows into the locked position, refer Figure 9. Gently pull on the cleaner bottom lid to
insure that it is properly locked in. The cleaner's bottom lid is now correctly installed.
Note: Ensure the R120's filter bag is completely enclosed within the cleaner housing as the bottom lid will not close properly, and the
cleaner will not operate.
Figure 1
Figure 4
Figure 7
Figure 2
Figure 5
Figure 8
6
Figure 3
Figure 6
Figure 9
Advertisement
Table of Contents
