Table Of Contents; Safety Information - Waterco R120 Installation - Operation - Warranty Manual

Robotic pool scrubber clean
Table of Contents

Advertisement

table of contents

coNGRatULatIoNS
Congratulations and thank you for choosing our Waterco R120 Robotic Pool Cleaner the most technologically advanced automatic Robotic Pool
Cleaner available.
We are sure you will find your new R120 a pleasure to use. Before you use the cleaner, we recommend that you read through the relevant
sections of this manual, which provides a description of your cleaner and its functions.
To avoid the risks that are always present when you use a Robotic Pool Cleaner, it is important that the cleaner is installed correctly and that
you read the safety instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.
After unpacking the R120, please check it is not damaged. If in doubt, do not use the cleaner but contact the store that you purchased the
cleaner.
WaRNING
1. DO NOT RUN THE R120 OUT OF THE WATER. OPERATING THE CLEANER OUT OF THE WATER WILL DAMAGE THE MOTORS AND VOID THE WARRANTY
2. THE R120 SHOULD NOT BE CONNECTED TO A TIMING DEVICE AND LEFT CONTINUOUSLY WITHIN A POOL OR SPA.
3. DON'T USE EXTENSION CORDS OR ADAPTER PLUGS WITH R120 - AS THIS MAY AFFECT THE CLEANER'S PERFORMANCE AND
EXPOSURE TO ELECTROCUTION (EXPOSURE TO PERSONAL INJURY OR DEATH).

SaFEtY INFoRMatIoN

1. Waterco's R120 Robotic Pool Cleaner is designed to work with water at a temperature greater than 13ºC (55ºF) and less than 45ºC (113ºF).
The cleaner should never be operated outside of these temperatures or damage may occur.
2. The installation should be carried out in accordance to local safety standards and bylaws.
3. Any modification of the R120 requires the prior consent from Waterco. Original replacement parts and accessories
authorised by the manufacturer ensure a high level of safety. Waterco assumes no liability for the damage and injuries caused by
unauthorised replacement parts and accessories.
4. The user should make sure that the installation is carried out by qualified authorised persons and that these persons have first carefully
read the following instructions.
5. The operating safety of the R120 is only guaranteed if the installation and operation instructions are correctly followed.
6. In the event of defective operation or fault, contact Waterco or its nearest authorised service agent.
2-3
3
4
4
5-6
5-6
6-7
8
8
8
8-11
12-13
14-15
2

Advertisement

Table of Contents
loading

Related Products for Waterco R120

Table of Contents