Table of Contents
Advertisement
Removing the Eloppy Shipping Card
When your
UNIX
card in the floppy disk drive.
protects the floppy disk drive during shipment.
you can proceed with the software installation you must
remove the shipping card from the floppy disk drive.
To remove the shipping card from the floppy drive:
1
Locate the floppy disk drive shown in the
following illustration:
2
3
Pull the shipping card from the floppy drive
and put it in the shipping carton.
You will want to insert this into your floppy
drive if you ever ship main unit to a new
location.
4
Leave the floppy drive open.
You have now completed the "Installing the
section of this guide.
following pages that show you how to adjust the screen
brightness and position the screen before you begin to
install your software.
PC is shipped, it contains a shipping
Take the time to read the
Installing
This shipping card
up and to the
card) to open the
UNIX
Hardware
Before
PC"
15
Advertisement
Table of Contents
