Promate GROOVE User Manual page 4

Ultra-portable 20w wireless speaker with 8800mah power bank aux port - microsd card slot

Available languages

1. Charging Groove

• Use the provided cable to charge Groove.

• Connect one end of the USB Cable provided to Groove and other end to your any other 5V/2A

USB Power Socket.

• The "Battery Indicator LED's" will light up indicating that Groove is charging normally. Once all

the LED Indicators light up, Groove is fully charged.

2. Turning Groove On/Off

• To turn on Groove, slide the "Power Switch" located on the back of Groove to the "ON" position.

• Slide the "Power Switch" located on the back of Groove to the "OFF" position to turn off Groove.

3. Bluetooth Pairing

• Groove automatically enters into Bluetooth pairing mode once powered on.

• To manually enter Bluetooth pairing mode, short press the "Multi-Function button"

• The "Bluetooth Mode Indicator" LED will begin flashing when in pairing mode.

• Turn on the Bluetooth function on your device and select "Groove" in the available devices list.

• Some Bluetooth devices may require you to enter a passcode to pair your device to Groove.

Enter "0000" and press submit.

• Once your device is successfully paired, the "Bluetooth Mode Indicator" LED will stop flashing.

English