Advertisement
ng wire.
Before adjusting the height of the door, rotate the downward adjusting
nut clockwise (as shown in Figure I) for 2 circles with a wrench,
and loosen the downward adjusting nut. Rotate the upward adjusting nut
(as shown in Figure I) to adjust the height, and then tighten the downward
Left
adjusting nut counterclockwise again.
1.When the door of refrigerating chamber is low:
Open the door, use the accompanying wrench to rotate the upward adjusting
nut counterclockwise according to the method as shown in Figure I, to move
it upward until it is parallel and level.
2.When the door of refrigerating chamber is high:
Open the door, use the accompanying wrench to rotate the upward adjusting
nut clockwise according to the method as shown in Figure I, to move it
downward, until it is parallel and level.
Advertisement
