TP-Link Archer C5400 User Manual page 78

Chapter 12
Done!
2 ) Click Save.
3 ) After configuring IGMP proxy, IPTV can work behind your
router now. You can connect your set-top box to any of
the router's Ethernet port.
If IGMP is not the technology your ISP apply to provide
IPTV service:
1 ) Tick the Enable IPTV
2 ) Select the appropriate
Bridge if your ISP is not listed and no other parameters
are required, and then skip to Step 4. Select
your ISP is not listed but provides necessary parameters.
3 ) After you have selected a mode, the necessary parameters
are predetermined. You can perform other configuration,
e.g. enter the
Multicast VLAN Priority
ISP.
4 ) For Russia,
and Malaysia-Maxis mode, connect device to the
predetermined LAN port. For Bridge and Custom mode,
select the LAN
corresponding port.
5 ) Click Save.
Your IPTV setup is done now! You may need other configurations
on your set-top box before enjoying your TV.
Tips
Qos and IPTV cannot be enabled at the same time.
Customize Your Network Settings
check box.
Mode according to your ISP. Select
IPTV Multicast VLAN ID
in Russia mode according to your
Singapore-ExStream,
type and connect the set-top box to the
Custom if
and select the IPTV
Malaysia-Unifi
74