Advertisement
Controlling by
RM-LP100 and Monitoring
with Dedicated Decoder
~ Controlling from Multiple Points ~
With various streaming protocols implemented in the camera, an external
streaming device is not required.
Monitoring can also be checked with a dedicated decoder via LAN.
Recordings can be made to the microSDHC/microSDXC card in the camera.
A microphone (plug-in power support) can be connected to the camera, and
other audio signals can be input to the camera.
For system in which PC is not used, control the camera with the remote
camera controller (RM-LP100).
The camera can be controlled from different locations with up to 5 units of
RM-LP100.
KY-PZ100 supports UDP multicast distribution that enables multipoint distribution.
Lag may occur depending on the network environment.
BR-DE800 is available in North America only.
Depending on the connected device and the network environment, the video
and audio during streaming may be unstable.
In such cases, reduce the bite rate setting. For details on the settable bit
rate, refer to the "Combinations of Record Format and Live Streaming Set
that Support Transmission" section under "Performing Live Streaming" in the
instruction manual.
Model No.
KY-PZ100
HD PTZ Remote Camera
RM-LP100
Remote Camera Controller
microSDXC Card
Audio System
HUB (PoE+)
BR-DE800
Network Decoder
DT-V24G2 *
Multi-Format LCD Monitor
LAN Cable (Category 5e)
Audio Cable
SDI Cable
* Selectable
Description
Quantity
1
2
1
1
2
2
2
6
1
2
26
Advertisement
