Storage; Maintenance And Cleaning; Ordering Spare Parts; Waste Disposal - Delta DOR 920 Instruction Manual

Result:
The appliance switches off after 7 hours have
elapsed.
6.2.3 Temperature indication in °C / °F
Press button 3 (F/C) to select between degrees
Celsius °C and degrees Fahrenheit °F for the
temperature indication in the LCD display. Press
button 3 repeatedly until the desired indication
appears.

7. Storage

If the radiator is not used for a lengthy period of time,
the mains lead must be stored in full in the
compartment provided for it. The radiator has to be
stored in a dry place, covered if possible.

8. Maintenance and cleaning

Maintenance and repair work may only be
carried out by an authorized electrical servicing
contractor or the customer service responsible
for your country.
Check the mains lead at regular intervals for
signs of defects or damage. A damaged mains
lead may only be replaced by an electrician or
the customer service responsible for your
country in compliance with the relevant
regulations.
Important: Disconnect the mains lead before
cleaning – danger of electric shock.
Use a damp cloth to clean the casing.
The ribs are filled with a special oil. Repairs that
necessitate the oil seal to be opened may only
be carried out by the customer service
responsible for your country. If oil leaks from the
appliance, return it to the customer service
responsible for your country for examination.

9. Ordering spare parts

Please provide the following information on all orders
for spare parts:
Model/type of machine
Article number of the machine
ID number of the machine
Number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
HELPLINE No. UK / N.IRELAND 0151 649 1500 REP. IRELAND HELPLINE NO 189 094 6244
Model Number: 3337

10. Waste disposal

Defective devices must be disposed of properly.
Please contact the customer service center
responsible for your country.
Accessories and packaging should be disposed of in
an environment-friendly fashion, i.e. by taking them
to a recycling depot. Plastic parts are coded for
purposes of separation when recycling.
08