Customer Service - Siemens ki34np60 User Manual

Fault
Appliance is not cooling,
temperature display lamps
and interior light are lit.
The interior light is not
working.
Temperature display
lamps are flashing.
Fig. 2/4, or Fig. 2/7.
Warning signal sounds
and the temperature
display lamp is flashing.
Fig. 2/4

Customer service

Your local customer service can be found
in the telephone directory or in the customer-
service index.
Please provide customer service with the
appliance product number (E-Nr.) and
production number (FD).
These specifications can be found on the
rating plate. Fig. A
To prevent unnecessary call-outs, please
assist customer service by quoting the
product and production numbers.
This will save you additional costs.
16
Possible cause
Showroom mode is
switched on.
The LED light is defective.
Door was open too long.
Light is switched off after
approx. 10 min.
Appliance door opened
frequently.
A lot of food was placed in
the freezer.
Fault – the freezer
compartment is too warm!
Frozen food is at risk!
Remedial action
Hold down alarm
button,Fig. 2/1, for
10 seconds until an
acknowledgement signal
sounds.
After a short time check
whether your appliance is
cooling.
See chapter "Light (LED)"
section.
When the door is closed and
opened, the light is on again.
Do not open the door
unnecessarily.
Switch on super freezing
before inserting the food.
See chapter entitled "Warning
signal".