Specifications - Makita DUH481 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Indicator lamps
3-2. CHECK button
4-1. Switch trigger A
4-2. Switch trigger B
4-3. Lock-off button
5-1. Indication lamp
8-1. Trimming direction
8-2. Hedge surface to be trimmed
8-3. Tilt the blades
9-1. String

SPECIFICATIONS

Model
Blade length
-1
Strokes per minute (min )
Rated voltage
Overall length
Net weight
BL1415 /
Battery cartridge
BL1415N
Battery charger
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Do not expose to rain.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
Explanation of general view
13-1. Press
13-2. Chip receiver
13-3. Nut
13-4. Shear blade
14-1. Hooks
14-2. Fit the hooks into groove
14-3. Grooves
15-1. Press the levers on both sides
15-2. Unlock the hooks
16-1. Screws
16-2. Under cover
17-1. Screws
17-2. Sponge
17-3. Washer
DUH481
480 mm
D.C. 14.4 V
869 mm 881 mm 873 mm
2.9 kg 3.1 kg 3.0 kg
BL1430 /
BL1815 /
BL1430B /
BL1815N /
BL1440 /
BL1820 /
BL1450 /
BL1820B
BL1460B
END013-4
of the European
DUH483 DUH521
1,350
D.C. 18 V D.C. 14.4 V
888 mm 919 mm
3.2 kg 3.0 kg
BL1830 /
BL1830B /
BL1840 /
BL1415 /
BL1840B /
BL1415N
BL1850 /
BL1850B /
BL1860B
DC18RC, DC18SD
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Intended use
The tool is intended for trimming hedges.
Noise
The typical A-weighted
according to EN60745:
Model DUH481,DUH483,DUH521
Sound pressure level (L
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
4
18-1. Gear
18-2. Sleeves
18-3. Washer
18-4. Groove
19-1. Blade cover
21-1. Grease
22-1. Grease
23-1. Blade
23-2. Sponge
23-3. Sleeves
24-1. Screws
24-2. Washer
25-1. Screws
DUH523
520 mm
D.C. 18 V
931 mm 923 mm
3.2 kg 3.0 kg
BL1430 /
BL1815 /
BL1430B /
BL1815N /
BL1440 /
BL1820 /
BL1450 /
BL1820B
BL1460B
and returned
noise level determined
) : 75 dB (A)
pA
938 mm
3.3 kg
BL1830 /
BL1830B /
BL1840 /
BL1840B /
BL1850 /
BL1850B /
BL1860B
to an
ENE014-1
ENG905-1