Display Panel Operation; Keyboard Pad Functions - Amana B136CAL3 Technical Information

Display Panel Operation

Keyboard Pad Functions

Entry Tone
Indicates a pad was pressed, command read and
accepted. Turn off entry tone by pressing and holding
Display On pad for 3 to 5 seconds.
Command Accepted Tone
Three short tones indicate command accepted.
Display On Pad
1. Activates control panel. Control panel remains
active at least 10 minutes.
2. Turns off Power Up Alarm (flashing lights) after
power is first plugged in or after power outage.
Note: All pads, except Alarm Off , are inactive until
Display On is pressed.
Freezer Temp Pad
Activates freezer temperature setting mode.
1. Freezer indicator light will glow. Freezer
temperature setting will be displayed. Factory
setting is 5 .
2. Change freezer temperature setting by pressing
Warmer or Colder pad.
Ref Temp Pad
Activates refrigerator temperature setting mode.
1. Refrigerator indicator light will glow. Refrigerator
temperature setting will be displayed. Factory
setting is 5 .
2. Change refrigerator temperature setting by pressing
Warmer or Colder pad.
Warmer Pad
Raises temperature setting one bar at a time. If entry
tone is on, tone will sound at each bar level until top
level is reached.
1. Turn on temperature setting function of control
panel by pressing Warmer pad.
2. Press and hold Warmer pad to raise temperature
setting at a faster rate.
Colder Pad
Lowers temperature setting one bar at a time. If entry
tone is on, tone will sound at each bar level until bottom
level is reached.
1. Turn on temperature setting function of control
panel by pressing Colder pad.
2. Press and hold Colder pad to lower temperature
setting at a faster rate.
Max Frz Pad
Activates Maximum freezer mode setting freezer
temperature to coldest setting for 24 hours or until
Max Frz pad is pressed again.
1. Freezer indicator light will glow.
2. To adjust maximum freezer mode time refer to
Program Mode B functions.
February 1998
Max Ref Pad
Activates Maximum refrigerator mode setting
refrigerator to coldest setting for 24 hours or until
Max Ref pad is pressed again.
1. Refrigerator indicator light will glow.
2. To adjust maximum refrigerator time refer to Mode
B functions.
Alarm Off Pad
Turns off alarm signals. See Alarms section to interpret
alarm signals.
1. Press and hold Alarm Off pad for 3 seconds to
deactivate Door Open alarm. To reactivate Door
Open alarm, press and hold Alarm Off pad for 3
seconds.
2. If Alarm Off pad is pressed and condition causing
alarm is not corrected, alarm will reset.
*
Activates Program Mode. See Program Mode section
for description of functions available.
1. Open refrigerator door.
2. Press Display On pad.
3. Press pad.
*
4. Within 6 seconds press the following pads in this
sequence: Max Ref, Max Frz, Max Ref, Max Frz.
5. Tone will sound 3 times and control will be in
program mode A.
Display Off Pad
1. Deactivates control panel.
2. Deactivates temperature indication area of control.
panel.
9 12074208