Table of Contents
Advertisement
A.5 Touch Screen Driver Installation
The TPM-A22FP is available with USB connections. The touch driver is located on the
enclosed CD-ROM for these operating systems: VISTA, XP, 2000, CE, XP Embedded,
Linux, Apple® Mac OS.
1.
The TPM-A22FP is Microsoft® Windows® HID (Human Interface
Device) compatible if you use the USB touch screen interface. No
additional software driver is required for general operation of the
touch screen.
2.
For TPM-A22FP, the system requires 15 seconds for Windows 7 to
install/uninstall the touch drivers while turning power on/off or
plugging/unplugging USB cable.
TPM-A22FP Driver Install Instructions:
If you are using a PC running VISTA, XP, 2000, follow the instructions below:
1. Power on the PC.
2. Be sure the USB cable is connected from the PC to the LCD display.
3. Open the CD-ROM.
4. Follow the step-by-step instructions as shown on the pop-up windows.
If you are using a PC running Windows® XP Embedded, follow the instructions
below:
Express:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF
by using the EWF Manager command.
4. Once the EWF is disabled click on the XP driver on the CD-ROM and follow the
step-by-step instructions as shown on the pop-up windows.
Custom:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the folder file on the CD-ROM.
21
Advertisement
Table of Contents
