Start Your Installation - Efco TPM-A22FP User Manual

3.3 Start Your Installation

Please follow these instructions so that you can hook up the cables to associated
connectors.
1. Lay the LCD flat on an even surface.
2. Move the stand into position as seen in the step 1 diagram.
3. Remove the cable cover as seen in the step 2 diagram.
4. Connect the cables to the appropriate connectors as seen in the step 3 diagram.
5. Re-attach the cable cover. Take the screw (CBM M3x6) out of the accessory box,
and insert the screw into the cable cover and monitor as seen in the step 4
diagram.
9