Table of Contents
Advertisement
4.2 How to Use the OSD Menus
1. Press the "Menu" button to pop up the "on-screen menu" and press "Up" or
"Down" button to select among the five functions in the main menu.
2.
Choose the adjustment items by pressing the "Select" button.
3.
Adjust the value of the adjustment items by pressing the "Up" or "Down" button.
4.
With the OSD menu on the screen, press the "Menu" button to return to the main
menu or to exit OSD.
5.
The OSD menu will automatically close, if you have left it idle for a pre-set time.
6.
To Lock the OSD / Power menu buttons, please follow the instructions below.
(Please note: the monitor should be turned ON with a valid signal pre-set)
(a.)
Press the "Menu" key; the OSD menu will open.
(b.)
Press and hold the "Menu" key again with the OSD menu on the screen; the
OSD menu will disappear. Then press the "Power" key 1 time while the
menu key is still being pressed. The "Lock/Unlock" menu will appear for 3
seconds.
(c.)
Use the "Select" key to select OSD or Power setting then set at "Lock" by
pushing the "UP" or "Down" button.
(d.)
When the "UP" or "Down" button is released, the previous setting will be
saved and exit the "Lock/Unlock" menu automatically.
7. To Unlock the OSD / Power menu buttons, please follow the instructions below.
(Please note: the monitor should be turned ON with a valid signal pre-set)
(a.)
Press and hold the "Menu" key then press the "Power" key simultaneously;
Icon
Key
Name
Menu
Up
Down
Select
Power
Photo_8 – OSD view
14
Advertisement
Table of Contents
