Whirlpool RF377PXY Use And Care Manual page 33

3. Set the cycle.
To start cbaning Immediately:
Set both the Oven Selector and Oven
Temperature Control Knob to CLEAN.
A 3-hour Self-Cleaning cycle will be set
automatically. 'C3:oo" with the colon
flashing will show in the diiay and the
Clean Time Indicator Liiht will come on.
If a cleaning cycle other than 3 hours
b desired, use the
Hour
and Minute
pads to set the desired cleaning time.
Push
the "up" (A) or "down" (r) pad(s)
until a time between 24 hours shows in
the display.
l
Use
2 hours for light soil.
l
Use 3-4 hours for moderate to
heavy
soil.
Push
the Start/Enter pad. The Clean
Time lndiitor Light will stay on to show
that the oven is programmed for the Self-
Cleaning cycle.
Skip to Step 4 if you want the Self-
Cleaning cycle to start now.
To delay the start using Stop Time:
Set both the Oven Selector
ad
Oven
Temperature Control Knob to CLEAN.
Push
the Stop Time pad. The Clean Time
Indicator Light will flash
and the Stop
Time lndiitor Light will liiht up.
Use
the
Hour and Minute pads to set the desired
stop time.
Push the "up" (A)
or "down"
(V) pad(s) until the correct time shows in
the display. The oven will automatically
compute the delay start time by subtract-
ing the set cleaning time from the set stop
time.