Safety; Malfunction And Remedy (Faq) - ALDI WZVC 1930 SA User Manual

Wet & Dry Vacuum Cleaner – WZVC 1930 SA

Malfunction and remedy (FAQ)

Problem
The vacuum
cleaner does
not work
Vacuuming
performance
unsatisfactory
AFTER SALES SUPPORT
0151 649 1500
72115_2342197_11016_UG.indd 37
Problem Cause
No power at the plug
Vacuum cleaner is switched off
Vacuum cleaner is switched to
'Auto' position with no power
tool connected
Vacuum cleaner is switched
to 'Auto' position with a
power tool connected, but
does not work when the
power tool is turned on
The vacuum cleaner works,
but there is no power to the
13A power tool socket
Dry working – Metal tank may
be full, pleated filter could be
blocked, or paper dirt bag
(if fitted) could be full
Wet working – Metal tank may
be full, or foamed plastic filter
could be blocked
1890 946244
Corrective Action
Check the power at the plug cable and fuse
Switch the vacuum cleaner on
Either connect a power tool and operate
the power tool to switch the vacuum
cleaner on, or set the switch to the 'ON'
setting to operate the vacuum cleaner.
Check the power tool for a failed fuse,
or not working
If the vacuum cleaner is still within
the 3 year warranty period, then
contact the after Sales support about a
warranty claim. If the vacuum cleaner
6 is outside of the warranty period, then
get an electrician or other competent
person to check it over
Empty the metal tank and either clean the
pleated filter and empty the paper dirt bag
(if fitted), or replace the pleated filter and
replace the paper dirt bag
Empty the metal tank and either clean or
replace the foamed plastic filter
Use
37
www.einhell.co.uk
16/05/2016 10:07 am