Download Print this page
Outcast Sporting Gear PAC 1200 Owner's Manual

Outcast Sporting Gear PAC 1200 Owner's Manual

Stable two-person pontoon boat

Advertisement

Quick Links

ALWAYS WEAR A GOVERNMENT APPROVED FLOATATION DEVISE WHEN FISHING.
KNOW THE LIMITS OF YOUR ABILITY AND THE LIMITS OF YOUR EQUIPMENT!
The PAC 1200 Contains:
2 - PAC 1200 Pontoons
1 - PAC 1200 Frame (8 Pieces)
1 - Seat Bottom
1 - Seat Bottom with Swivel
2 - Seat Pads
Hardware Packet Contains:
4 - Folding Seat Hinge Pins
2 - Clevis Pins
2 - Split Rings
16 -Springer Clips
16 - 32" Cam Straps
10 - Seat Buttons
Repair Kit Includes:
1 - Two-Part Stabond Adhesive
1 - Stabond Instructions
1 - Leafield B-7 Valve Wrench
1 - Piece Supported Urethane
1 - Piece Unsupported Urethane
1 - Piece Sand Paper
Items Needed for Assembly:
Phillips Screwdriver
Pump
Optional Accessory:
20 Pound Anchor & Rope
PAC 1200
2 - Seat Backs
1 - 13" Seat Pedestal
1 - 7" Seat Pedestal
4 - Deluxe Cargo Pockets
2 - 8' Oar Shafts
20 - Seat Knobs
8 - 1" Carriage Bolts
4 - 1.5" Carriage Bolts
2 - 1.75" Carriage Bolts
4 - 2" Carriage Bolts
2 - 2.25" Carriage Bolts
4 - Large Washers
1 - Piece Colored Fabric
1 - Piece Gray Fabric
5 - Nylon Wire Ties
2 - Split Rings
1 - Roll Vinyl Repair Tape
1 - Needle
(not included)
Hammer
Wood block
(not included)
2 - 6.5" Oar Blades
1 - Hardware Packet
1 - Repair Kit
20 - Small Washers
2 - Large Oar Sleeves
2 - Large Brass Oar Locks
2 - Oar Lock Spacers
2 - Split Rings
1 - Repair Cord
1 - Zipper Car
1 - Warranty Card
1 - Owner's Manual
1 - Tube of E-6000 / GOOP
1 - Leafield Valve Adapter

Advertisement

loading
Need help?

Need help?

Do you have a question about the PAC 1200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Outcast Sporting Gear PAC 1200

  • Page 1 The PAC 1200 Contains: 2 - PAC 1200 Pontoons 2 - Seat Backs 2 - 6.5” Oar Blades 1 - PAC 1200 Frame (8 Pieces) 1 - 13” Seat Pedestal 1 - Hardware Packet 1 - Seat Bottom 1 - 7” Seat Pedestal...
  • Page 2 1. Place the casting platform in front of the front seat plate assembly. Align the holes and use the (2) Clevis pins, (4) small washers and (2) split rings to secure the casting platform to the PAC 1200 frame. Front Seat Assembly...
  • Page 3 Make sure to tighten the seat knobs before each use! Cargo Pocket Installation Items needed: 1 - Assembled PAC 1200 Frame 4 - Deluxe Cargo Pockets 1. Secure (2) Deluxe Cargo Pockets onto the left and right front frame sides (one each side) next to the lean bar using the side release buckles.
  • Page 4: Securing The Frame

    2. Place the PAC 1200 frame on top of the pontoons. Center the frame between the D-rings on the side of the boat. 3. Using (8) 2’ Cam Straps for the inside D-rings and (8) 3’ Cam Straps for the outside D-rings (one for each D-ring) secure the frame to the pontoons.
  • Page 5: Warranty

    If you have a problem, send your boat to Outcast Sporting Gear, and we’ll fix it for free. If it’s our fault, we pay return shipping; if it’s pilot error, you pay return shipping.