Installing The Fl Inverter Board - Toshiba Satellite M20 Maintenance Manual

4 Replacement Procedures

Installing the FL Inverter Board

Install the FL inverter board according to the following procedures and Figures 4-23 and 4-24.
1. Connect the LCD/FL cable to CN1, and connect the HV cable to CN2.
2. Place the FL inverter board in the correct position.
3. Fasten the M2x5 white bind screw to fix the FL inverter board.
4-38
Figure 4-24 Disconnecting the cables
4.9 FL Inverter Board
Satellite M20 Maintenance Manual