Toshiba Satellite M20 Maintenance Manual page 237

4 Replacement Procedures
11. Attach the protective cover S (A), protective cover G (B), aluminum tape (C), and tape
for lead fixing (D), all of which must be new ones.
Attach the protective cover (A) then cover (B), using the engaging pins as the guide.
Fold the ends of the covers toward the side of the bezel.
• When attaching the aluminum tape (C)
− Align a longer side with the marking on the lamp cover on the reverse
− Align a shorter side with the edge of the lamp cover.
• When attaching the tape for lead fixing (D)
• Align a longer side with the marking on the lamp cover on the reverse side of
the bezel.
− Align a shorter side with the location where the head of the screw is
• When attaching the retention tape (H)
− Align both a longer and a shorter sides with the rectangular hole.
Figure 4-70 Attaching the protective cover and tapes
4-86
side of the bezel.
covered.
4.21 Sharp 14.1-inch FL
Rectangular hole
Engaging pins
Satellite M20 Maintenance Manual