Toshiba Satellite A350 Maintenance Manual page 72

2 Troubleshooting Procedures
36
To determine if the computer's IEEE 1394 system is functioning properly, perform the
following procedures. Figure 2-12 outlines the process. Start with Procedure 1 and continue
Procedure 1
Connect an IEEE 1394 device to the computer's IEEE 1394 port, then boot the computer for
Windows Vista. The computer should automatically detect the 1394 device. Check whether
the device can transmit data to the computer.
If the device is able to communicate with the computer, the problem may be intermittent or
connections may be faulty. Go to Procedure 2.
If communication is impaired, there may be a faulty connection. Go to Procedure 3.
Procedure 2
Run the Diagnostic Program, which will automatically execute the IEEE 1394 port test for
transmission. Refer to Chapter 3, Tests and Diagnostics for more information on how to run
the program.
If an error is located, go to Procedure 3. If an error does not occur, the 1394 port is
functioning properly.
Procedure 3
The transmission cable may be damaged or the connections may be loose. Perform Check 1:
Check 1
Check 2
Check 3
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
Downloaded from www.Manualslib.com
Figure 2-12 IEEE 1394 troubleshooting process
with the other procedures as instructed.
Procedure 1: IEEE 1394 device check
Procedure 2: Diagnostic check
Procedure 3: Connection and replacement check
IEEE 1394 device check
Diagnostic check
Connection and replacement check
Make sure the transmission cable is firmly plugged into both the IEEE 1394-
compatible device and the IEEE 1394 port of the computer. If the cable is
connected correctly, go to Check 2.
Make sure the IEEE 1394 port is firmly secured to the system board of the
computer. If the malfunction persists, go to Check 3.
The transmission cable may be damaged. Replace with a good cable. If the
malfunction persists, go to Check 4
manuals search engine
36