Toshiba Satellite A350 Maintenance Manual page 47

2 Troubleshooting Procedures
To check the power supply status, install a battery pack and connect an AC adaptor to the
DC-IN port on the computer and to a power supply.
If the DC-IN LED or Battery LED is not lit, go to Procedure 2.
Procedure 2
A faulty adaptor may not supply power or may not charge the battery. Perform Check 1.
Check 1
Check 2
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
Downloaded from www.Manualslib.com
AC-IN LED Power supply status
Solid on AC power exists (LED is solid Blue).
Off No AC power exists.
Table 2-2 DC-IN LED
Adaptor / battery replacement
Connect a new AC adaptor. If the problem is not resolved, go to Check 2.
Insert a new battery. If the problem is still not resolved, go to Procedure 3.
manuals search engine
11