Do you have a question about the 7CCO and is the answer not in the manual?
Questions and answers
barry jacobs
February 19, 2025
need wire sch for this generator
1 comments:
Mr. Anderson
February 19, 2025
The wiring schematic for the Kohler 7CCO generator includes the following details:
- It uses a single-pole circuit breaker for 120/240V or 100/200V, 60 Hz, and 200-240V, 2-wire configurations. - The stator leads are labeled 4, 3, 2, and 1. - A two-pole circuit breaker is required for 240V (or 220V) loads to comply with NEC requirements. - Leads L1 and L2 are used for connections. - A decal (part no. 246242) is available to indicate reconnected voltage.
For exact wiring details, follow the National Electrical Code (NEC) and the generator's nameplate specifications.
Need help?
Do you have a question about the 7CCO and is the answer not in the manual?
Questions and answers
need wire sch for this generator
The wiring schematic for the Kohler 7CCO generator includes the following details:
- It uses a single-pole circuit breaker for 120/240V or 100/200V, 60 Hz, and 200-240V, 2-wire configurations.
- The stator leads are labeled 4, 3, 2, and 1.
- A two-pole circuit breaker is required for 240V (or 220V) loads to comply with NEC requirements.
- Leads L1 and L2 are used for connections.
- A decal (part no. 246242) is available to indicate reconnected voltage.
For exact wiring details, follow the National Electrical Code (NEC) and the generator's nameplate specifications.
This answer is automatically generated