Frigidaire CFEF2411RW Use & Care Manual page 14

SETTING OVEN CONTROLS
Timer Functions
This appliance is equipped with three timer options: minute
countdown timer, cook time (dur), and end time (END).
Table 2: Timer Functions
Function
Minute Timer ( )
Cook Time Duration (dur)
End Time (END)
Display Indicators
A B
Figure 12: Clock display functions
• A: Duration and End time indicator
• B: Time display
• C: Timer active indicator
• D: Minute timer indicator
To set a timer function:
1. For Duration (dur) and END (end), use the oven temp
and oven mode knobs to set an oven function and
cooking temperature. (This is not necessary for
2. Press timer on-off until the desired function option
appears, indicated by the bell symbol, dur, or END, and
starts to flash.
3. Press or to set the desired timer function. The
timer function activates, and the corresponding
indicator will appear in the display. For End and dur, A
will also appear in the display.
NOTE
Duration and End time may be used at the same time if
you want the appliance to activate and deactivate auto-
matically. First, set Duration. Then, set End.
14
Application
Use to track your cooking times without interfering with the cooking process. The timer
may be set from a minimum time of 1 minute to a maximum of 23 hours and 59 minutes.
Use to set the cooking time of the oven, from 1 minute to 10 hours.
Use to program the oven when to stop cooking, from 1 minute to 10 hours.
C D
4. When the time ends, the function's indicator on the
display will start flashing and an signal will sound for two
minutes. Press any button to stop the signal.
IMPORTANT
With the Duration and End functions, the appliance will
stop cooking automatically.
To cancel the timer function:
1. Press timer on-off until the desired function option
appears.
2. Press and hold
timer function will go out after several seconds.
To change the acoustic signal:
1. To hear the current signal, press and hold
2. Repeatedly press
3. Release
.)
signal.
4. Wait five seconds for the setting to be confirmed.
NOTE
When the appliance is disconnected from the outlet or
after a power outage, the signal tone will be set back to
the default tone.
and at the same time. The
to change the signal.
. The last tone you heard will be the new
.