Section-1: Before Using The Machine; Important Warnings - Spinshot Player User Manual

Section-1: Before Using the Machine

Introduction
Thank you for purchasing a SPINSHOT tennis ball machine. This
manual contains important information concerning the proper use and
care of your ball machine. Please read your owner's manual
completely before operating your machine.
Tennis Balls To Be Used
Please take note that brand new tennis balls are not recommended to
be used especially during first ten hours of break-in period. The ink
and waxy coating on brand new tennis balls can leave a slick coating
on the new ball throwing wheels, resulting in inconsistent ball throws.
It is best to use balls that are slightly used to reduce the potential for
developing the slick coating on the wheels.
The consistency of ball throws will depend on the consistency of the
tennis balls used. A mixture of new and old balls will produce
inconsistent throws. Inconsistent ball throws may also be caused by
excess dirt and ink build up on throwing wheels. Cleaning the ball
throwing wheels as described in the section "Maintenance and
Cleaning" will restore consistent performance.

Important Warnings

WARNING: Do not reach or look into the ball exit hole without turning
the main power off and only after both wheels come to a complete
stop.
WARNING: Do not stand closer than 10 meters in front of the ball
machine when the power is on.
WARNING: Do not place balls or foreign objects into the ball hopper
while the power is on. It could cause a jam and damage the feeder
motor.
WARNING: The overloading of balls into the ball hopper may result in