Spinshot Player User Manual page 10

The list of below will introduce each button's function.
If the Phone Remote can't be connected, press the logo at the top
Drill
left corner and this will set up the WIFI connection with the ball
maker
machine. Not required to reset the machine or APP.
Press it to start the machine to feed the balls. Press again to
stop the feeding of the balls. It is not required to press this for
switching between different drill modes.
Pressing different D buttons will allow the machine to provide different
drill modes. Long pressing will enter settings page where user can
edit all parameters for each shot. In the setting page, the drill setting
can be downloaded to the machine by clicking the save button. See
section "Drill Setting" for more details.
This button is effective in manual mode. Press this button
first before adjusting spin level.
This button is effective in manual mode. Press this button
first before adjusting height level.