Table of Contents
Advertisement
00_AF360FGZ.book Page 49 Tuesday, June 13, 2006 12:09 PM
nSlave Mode Setting
To properly control the slave flash, it is necessary to set
the slave mode settings.
2 seconds
or more
Procedure
1
Slide the setting switch up.
2
Press the LCD panel illumination button (LIGHT)
for 2 seconds or more. SLAVE1 will be displayed.
3
Pressing the select button (S) switches between
1 and 2.
1:
When photographing in wireless mode
2:
When photographing with slave flash
l The flash will not fire properly if the slave mode
was set to the wrong mode. It may not fire at all
or may fire simultaneously with the control flash.
4
Press the LCD panel illumination button (LIGHT)
to finish setting.
l In SLAVE2, fluorescent lamps flicker may contribute
to flash unit's erroneous firing on rare occasions.
49
Hide quick links:
Advertisement
Table of Contents
